updated

Merge pull request #207 from JaKooLit/main

CHANGELOGS.md

@@ -1,5 +1,9 @@
 ## CHANGELOGS
 
+## 22 July 2025
+- Updated sddm theme and script to work with the updated simple_sddm_2 theme
+- Manual building process
+
 ## 21 June 2025
 - Added a warning message that support is now very limited
 

README.md

@@ -29,7 +29,7 @@
 </div>
 <div align="center">
 <br>
-  <a href="https://github.com/JaKooLit/Hyprland-Dots/tree/Deb-Untu-Dots"><kbd> <br> Hyprland-Dots Debian repo <br> </kbd></a>&ensp;&ensp;
+  <a href="https://github.com/JaKooLit/Hyprland-Dots/tree/Debian-Dots"><kbd> <br> Hyprland-Dots Debian repo <br> </kbd></a>&ensp;&ensp;
   <a href="https://www.youtube.com/playlist?list=PLDtGd5Fw5_GjXCznR0BzCJJDIQSZJRbxx"><kbd> <br> Youtube <br> </kbd></a>&ensp;&ensp;
   <a href="https://github.com/JaKooLit/Hyprland-Dots/wiki"><kbd> <br> Wiki <br> </kbd></a>&ensp;&ensp;
   <a href="https://github.com/JaKooLit/Hyprland-Dots/wiki/Keybinds"><kbd> <br> Keybinds <br> </kbd></a>&ensp;&ensp;
@@ -80,7 +80,11 @@ sudo nano /etc/apt/sources.list
 - ensure to allow to install non-free drivers especially for users with NVIDIA gpus. You can also install non-free drivers if required. Edit install-scripts/nvidia.sh and change the nvidia stuff's if required
 
 ### 🪧🪧🪧 ANNOUNCEMENT 🪧🪧🪧
-- This Repo does not contain Hyprland Dots or configs! Pre-configured Dotfiles are on [`Hyprland-Dots`](https://github.com/JaKooLit/Hyprland-Dots/tree/Deb-Untu-Dots) . During installation, if you opt to copy pre-configured dots, it will be downloaded from that centralized repo.
+- 25 July 2025 Update!
+- All Hyprland and associated packages set to install using this script are downloaded and built from source (github). However, do note that it is downloaded from each individual releases. You can set versions by editing the scripts located install-scripts directory.
+- These packages are NOT updated automatically. You need to manually update it yourself
+- 
+- This Repo does not contain Hyprland Dots or configs! Pre-configured Dotfiles are on [`Hyprland-Dots`](https://github.com/JaKooLit/Hyprland-Dots/tree/Debian-Dots) . During installation, if you opt to copy pre-configured dots, it will be downloaded from that centralized repo.
 
 - Hyprland-Dots use are constantly evolving / improving. you can check CHANGELOGS here [`Hyprland-Dots-Changelogs`](https://github.com/JaKooLit/Hyprland-Dots/wiki/Changelogs)
 - Since the Hyprland-Dots are evolving, some of the screenshots maybe old

assets/hyprland.desktop

@@ -1,5 +0,0 @@
-[Desktop Entry]
-Name=Hyprland
-Comment=An intelligent dynamic tiling Wayland compositor
-Exec=Hyprland
-Type=Application

install-scripts/00-dependencies.sh

@@ -3,56 +3,131 @@
 # main dependencies #
 # 22 Aug 2024 - NOTE will trim this more down
 
-
 # packages neeeded
 dependencies=(
-    build-essential
+  build-essential
-    cmake
+  cmake
-    cmake-extras
+  cmake-extras
-    curl
+  curl
-    findutils
+  findutils
-    gawk
+  gawk
-    gettext
+  gettext
-    git
+  gir1.2-graphene-1.0
-    glslang-tools
+  git
-    gobject-introspection
+  glslang-tools
-    golang
+  gobject-introspection
-    hwdata
+  golang
-    jq
+  hwdata
-    libegl-dev
+  jq
-    libegl1-mesa-dev
+  libavcodec-dev
-    meson
+  libavformat-dev
-    ninja-build
+  libavutil-dev
-    openssl
+  libcairo2-dev
-    psmisc
+  libdeflate-dev
-    python3-mako
+  libdisplay-info-dev
-    python3-markdown
+  libdrm-dev
-    python3-markupsafe
+  libegl-dev
-    python3-yaml
+  libegl1-mesa-dev
-    python3-pyquery
+  libgbm-dev
-    qt6-base-dev
+  libgdk-pixbuf-2.0-dev
-    spirv-tools
+  libgdk-pixbuf2.0-bin
-    unzip
+  libgirepository1.0-dev
-    vulkan-validationlayers
+  libgl1-mesa-dev
-    vulkan-utility-libraries-dev
+  libgraphene-1.0-0
-    wayland-protocols
+  libgraphene-1.0-dev
-    xdg-desktop-portal
+  libgtk-3-dev
-    xwayland
+  libgulkan-0.15-0t64
+  libgulkan-dev
+  libinih-dev
+  libinput-dev
+  libjbig-dev
+  libjpeg-dev
+  libjpeg62-turbo-dev
+  liblerc-dev
+  libliftoff-dev
+  liblzma-dev
+  libnotify-bin
+  libpam0g-dev
+  libpango1.0-dev
+  libpipewire-0.3-dev
+  libqt6svg6
+  libsdbus-c++-dev
+  libseat-dev
+  libstartup-notification0-dev
+  libswresample-dev
+  libsystemd-dev
+  libtiff-dev
+  libtiffxx6
+  libtomlplusplus-dev
+  libudev-dev
+  libvkfft-dev
+  libvulkan-dev
+  libvulkan-volk-dev
+  libwayland-dev
+  libwebp-dev
+  libxcb-composite0-dev
+  libxcb-cursor-dev
+  libxcb-dri3-dev
+  libxcb-ewmh-dev
+  libxcb-icccm4-dev
+  libxcb-present-dev
+  libxcb-render-util0-dev
+  libxcb-res0-dev
+  libxcb-util-dev
+  libxcb-xinerama0-dev
+  libxcb-xinput-dev
+  libxcb-xkb-dev
+  libxkbcommon-dev
+  libxkbcommon-x11-dev
+  libxkbregistry-dev
+  libxml2-dev
+  libxxhash-dev
+  meson
+  ninja-build
+  openssl
+  psmisc
+  python3-mako
+  python3-markdown
+  python3-markupsafe
+  python3-pyquery
+  python3-yaml
+  qt6-base-dev
+  scdoc
+  seatd
+  spirv-tools
+  unzip
+  vulkan-utility-libraries-dev
+  vulkan-validationlayers
+  wayland-protocols
+  xdg-desktop-portal
+  xwayland
 )
 
 # hyprland dependencies
 hyprland_dep=(
-    bc
+  bc
-    binutils
+  binutils
-    libc6
+  libc6
-    libcairo2
+  libcairo2-dev
-    libdisplay-info2
+  libdisplay-info2
-    libdrm2
+  libdrm2
-    libhyprcursor-dev
+  libjpeg-dev
-    libhyprlang-dev
+  libjxl-dev
-    libhyprutils-dev
+  libmagic-dev
-    libpam0g-dev
+  libpixman-1-dev
-    hyprcursor-util
+  libpugixml-dev
+  libre2-dev
+  librsvg2-dev
+  libspng-dev
+  libtomlplusplus-dev
+  libwebp-dev
+  libzip-dev
+  libpam0g-dev
+  libxcursor-dev
+  qt6-declarative-dev
+  qt6-base-private-dev
+  qt6-wayland-dev
+  qt6-wayland-private-dev
 )
 
 build_dep=(
@@ -88,4 +163,4 @@ for PKG1 in "${build_dep[@]}"; do
   build_dep "$PKG1" "$LOG"
 done
 
-printf "\n%.0s" {1..2}
+printf "\n%.0s" {1..2}

install-scripts/01-hypr-pkgs.sh

@@ -12,52 +12,52 @@ Extra=(
 
 # packages needed
 hypr_package=(
-    cliphist
+  cliphist
-    grim
+  grim
-    gvfs
+  gvfs
-    gvfs-backends
+  gvfs-backends
-    inxi
+  inxi
-    imagemagick
+  imagemagick
-    kitty
+  kitty
-    nano
+  nano
-    pavucontrol
+  pavucontrol
-    playerctl
+  playerctl
-    polkit-kde-agent-1
+  polkit-kde-agent-1
-    python3-requests
+  python3-requests
-    python3-pip
+  python3-pip
-    qt5ct
+  qt5ct
-    qt5-style-kvantum
+  qt5-style-kvantum
-    qt5-style-kvantum-themes
+  qt5-style-kvantum-themes
-    qt6ct
+  qt6ct
-    slurp
+  slurp
-    swappy
+  swappy
-    sway-notification-center
+  sway-notification-center
-    unzip
+  unzip
-    waybar
+  waybar
-    wget
+  wget
-    wl-clipboard
+  wl-clipboard
-    wlogout
+  wlogout
-    xdg-user-dirs
+  xdg-user-dirs
-    xdg-utils
+  xdg-utils
-    yad
+  yad
 )
 
 # the following packages can be deleted. however, dotfiles may not work properly
 hypr_package_2=(
-    brightnessctl
+  brightnessctl
-    btop
+  btop
-    cava
+  cava
-    fastfetch
+  fastfetch
-    loupe
+  loupe
-    gnome-system-monitor
+  gnome-system-monitor
-    mousepad
+  mousepad
-    mpv
+  mpv
-    mpv-mpris
+  mpv-mpris
-    nwg-look
+  nwg-look
-    nwg-displays
+  nwg-displays
-    nvtop
+  nvtop
-    pamixer
+  pamixer
-    qalculate-gtk
+  qalculate-gtk
 )
 
 # packages to force reinstall 
@@ -68,10 +68,10 @@ force=(
 
 # List of packages to uninstall as it conflicts with swaync or causing swaync to not function properly
 uninstall=(
-    dunst
+  dunst
-    mako
+  mako
-    rofi
+  rofi
-    cargo
+  cargo
 )
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
@@ -140,4 +140,4 @@ source "$HOME/.cargo/env"
 ## making brightnessctl work
 sudo chmod +s $(which brightnessctl) 2>&1 | tee -a "$LOG" || true
 
-printf "\n%.0s" {1..2}
+printf "\n%.0s" {1..2}

install-scripts/02-pre-cleanup.sh

@@ -9,10 +9,6 @@ TARGET_DIR="/usr/local/bin"
 
 # Define packages to manually remove (was manually installed previously)
 PACKAGES=(
-  hyprctl
-  hyprpm
-  hyprland
-  Hyprland
   cliphist
   pypr
   swappy
@@ -20,6 +16,20 @@ PACKAGES=(
   magick
 )
 
+# List of packages installed from Debian-Hyprland repo
+uninstall=(
+  hyprland
+  xdg-desktop-portal-hyprland
+  libhhyprland-dev
+  libhyprutils-dev
+  libhyprutils0
+  hyprwayland-scanner
+  hyprland-protocols
+  hyprctl
+  hyprpm
+  Hyprland
+)
+
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
@@ -51,4 +61,19 @@ for PKG_NAME in "${PACKAGES[@]}"; do
   fi
 done
 
-clear
+
+# packages removal installed from Debian-Hyprland repo
+overall_failed=0
+printf "\n%s - ${SKY_BLUE}Removing some packages${RESET} installed from Debian Hyprland official repo \n" "${NOTE}"
+for PKG in "${uninstall[@]}"; do
+  uninstall_package "$PKG" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    overall_failed=1
+  fi
+done
+
+if [ $overall_failed -ne 0 ]; then
+  echo -e "${ERROR} Some packages failed to uninstall. Please check the log."
+fi
+
+printf "\n%.0s" {1..1}

install-scripts/03-Final-Check.sh

@@ -11,11 +11,11 @@ packages=(
   cliphist
   wlogout
   kitty
-  hyprland
 )
 
 # Local packages that should be in /usr/local/bin/
 local_pkgs_installed=(
+  hyprland
   rofi
   hypridle
   hyprlock

install-scripts/aquamarine.sh

@@ -0,0 +1,53 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# aquamarine #
+
+
+#specific branch or release
+tag="v0.9.2"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_aquamarine.log"
+MLOG="install-$(date +%d-%H%M%S)_aquamarine.log"
+
+# Installation of dependencies
+printf "\n%s - Installing ${YELLOW}aquamarine dependencies${RESET} .... \n" "${INFO}"
+
+# Check if aquamarinedirectory exists and remove it
+if [ -d "aquamarine" ]; then
+    rm -rf "aquamarine"
+fi
+
+# Clone and build 
+printf "${INFO} Installing ${YELLOW}aquamarine $tag${RESET} ...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/aquamarine.git; then
+    cd aquamarine || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} ${MAGENTA}aquamarine $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for ${YELLOW}aquamarine $tag${RESET}" 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for ${YELLOW}aquamarine $tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/dotfiles-branch.sh

@@ -3,7 +3,7 @@
 # Hyprland-Dots to download from main #
 
 #specific branch or release
-dots_tag="Deb-Untu-Dots"
+dots_tag="Debian-Dots"
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"

install-scripts/hyprcursor.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hyprcursor #
+
+cursor=(
+libzip-dev
+librsvg2-dev
+)
+
+#specific branch or release
+tag="v0.1.12"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprcursor.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprcursor.log"
+
+# Installation of dependencies
+printf "\n%s - Installing hyprcursor dependencies.... \n" "${NOTE}"
+
+for PKG1 in "${cursor[@]}"; do
+  install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+
+# Check if hyprcursor folder exists and remove it
+if [ -d "hyprcursor" ]; then
+    printf "${NOTE} Removing existing hyprcursor folder...\n"
+    rm -rf "hyprcursor"
+fi
+
+# Clone and build 
+printf "${NOTE} Installing hyprcursor...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprcursor.git; then
+    cd hyprcursor || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} hyprcursor installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for hyprcursor." 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for hyprcursor." 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}
+
+

install-scripts/hyprgraphics.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hyprgraphics #
+
+hyprgraphics=(
+	libmagic
+)
+
+#specific branch or release
+tag="v0.1.5"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprgraphics.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprgraphics2.log"
+
+# Installation of dependencies
+printf "\n%s - Installing ${YELLOW}hyprgraphics dependencies${RESET} .... \n" "${INFO}"
+
+for PKG1 in "${hyprgraphics[@]}"; do
+  re_install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+printf "\n%.0s" {1..1}
+
+# Check if hyprgraphics directory exists and remove it
+if [ -d "hyprgraphics" ]; then
+    rm -rf "hyprgraphics"
+fi
+
+# Clone and build 
+printf "${INFO} Installing ${YELLOW}hyprgraphics $tag${RESET} ...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprgraphics.git; then
+    cd hyprgraphics || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target hyprgraphics -j`nproc 2>/dev/null || getconf _NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} ${MAGENTA}hyprgraphics $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprgraphics $graphics${RESET}" 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprgraphics $graphics${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/hypridle.sh

@@ -7,7 +7,7 @@ idle=(
 )
 
 #specific branch or release
-idle_tag="v0.1.2"
+tag="v0.1.6"
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
@@ -43,21 +43,21 @@ if [ -d "hypridle" ]; then
 fi
 
 # Clone and build 
-printf "${INFO} Installing ${YELLOW}hypridle $idle_tag${RESET} ...\n"
+printf "${INFO} Installing ${YELLOW}hypridle $tag${RESET} ...\n"
-if git clone --recursive -b $idle_tag https://github.com/hyprwm/hypridle.git; then
+if git clone --recursive -b $tag https://github.com/hyprwm/hypridle.git; then
     cd hypridle || exit 1
 	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -S . -B ./build
 	cmake --build ./build --config Release --target hypridle -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
     if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
-        printf "${OK} ${MAGENTA}hypridle $idle_tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+        printf "${OK} ${MAGENTA}hypridle $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
     else
-        echo -e "${ERROR} Installation failed for ${YELLOW}hypridle $idle_tag${RESET}" 2>&1 | tee -a "$MLOG"
+        echo -e "${ERROR} Installation failed for ${YELLOW}hypridle $tag${RESET}" 2>&1 | tee -a "$MLOG"
     fi
     #moving the addional logs to Install-Logs directory
     mv $MLOG ../Install-Logs/ || true 
     cd ..
 else
-    echo -e "${ERROR} Download failed for ${YELLOW}hypridle $idle_tag${RESET}" 2>&1 | tee -a "$LOG"
+    echo -e "${ERROR} Download failed for ${YELLOW}hypridle $tag${RESET}" 2>&1 | tee -a "$LOG"
 fi
 
 printf "\n%.0s" {1..2}

install-scripts/hyprland-protocols.sh

@@ -0,0 +1,52 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hypland-protocols #
+
+
+#specific branch or release
+tag="v0.6.4"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_protocols.log"
+MLOG="install-$(date +%d-%H%M%S)_protocols2.log"
+
+# Installation of dependencies
+printf "\n%s - Installing ${YELLOW}hyprland-protocols dependencies${RESET} .... \n" "${INFO}"
+
+# Check if hyprland-protocols directory exists and remove it
+if [ -d "hyprland-protocols" ]; then
+    rm -rf "hyprland-protocols"
+fi
+
+# Clone and build 
+printf "${INFO} Installing ${YELLOW}hyprland-protocols $tag${RESET} ...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprland-protocols.git; then
+    cd hyprland-protocols || exit 1
+	meson setup build
+    if sudo meson install -C build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} ${MAGENTA}hyprland-protocols $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprland-protocols $tag${RESET}" 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprland-protocols tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/hyprland-qt-support.sh

@@ -0,0 +1,73 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hypland-qt-support #
+
+qt_support=(
+    qt6-base-dev
+    qt6-wayland
+    qt6-declarative-dev
+    qml6-module-qtcore
+    qml6-module-qtquick-layouts
+    qt6-tools-dev
+    qt6-tools-dev-tools
+    qt6-charts-dev
+)
+
+#specific branch or release
+tag="v0.1.0"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprland-qt-support.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprland-qt-support2.log"
+
+# Installation of dependencies
+printf "\n%s - Installing ${YELLOW}hyprland-qt-support dependencies${RESET} .... \n" "${INFO}"
+
+for PKG1 in "${qt_support[@]}"; do
+  re_install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - ${YELLOW}$PKG1${RESET} Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+
+printf "\n%.0s" {1..1}
+
+# Check if hyprland-qt-support directory exists and remove it
+if [ -d "hyprland-qt-support" ]; then
+    rm -rf "hyprland-qt-support"
+fi
+
+# Clone and build 
+printf "${INFO} Installing ${YELLOW}hyprland-qt-support $tag${RESET} ...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprland-qt-support.git; then
+    cd hyprland-qt-support || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} ${MAGENTA}hyprland-qt-support $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprland-qt-support $tag${RESET}" 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprland-qt-support $tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/hyprland-qtutils.sh

@@ -0,0 +1,75 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hypland-qtutils #
+
+qtutils=(
+	libqt6core5compat6
+    qt6-base-dev
+	qt6-wayland-dev
+    qt6-wayland
+	qt6-declarative-dev
+	qml6-module-qtcore
+	qt6-3d-dev
+	qt6-5compat-dev
+    libqt6waylandclient6
+    qml6-module-qtwayland-client-texturesharing
+)
+
+#specific branch or release
+tag="v0.1.4"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprland-qtutils.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprland-qtutils2.log"
+
+# Installation of dependencies
+printf "\n%s - Installing ${YELLOW}hyprland-qtutils dependencies${RESET} .... \n" "${INFO}"
+
+for PKG1 in "${qtutils[@]}"; do
+  re_install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - ${YELLOW}$PKG1${RESET} Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+
+printf "\n%.0s" {1..1}
+
+# Check if hyprland-qtutils directory exists and remove it
+if [ -d "hyprland-qtutils" ]; then
+    rm -rf "hyprland-qtutils"
+fi
+
+# Clone and build 
+printf "${INFO} Installing ${YELLOW}hyprland-qtutils $tag${RESET} ...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprland-qtutils.git; then
+    cd hyprland-qtutils || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} ${MAGENTA}hyprland-qtutils $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprland-qtutils $tag${RESET}" 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprland-qtutils $tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/hyprland.sh

@@ -1,44 +1,80 @@
 #!/bin/bash
 # 💫 https://github.com/JaKooLit 💫 #
-# Main Hyprland Package #
+# Main Hyprland Package#
 
-hypr=(
+#specific branch or release
-  hyprland-protocols
+tag="v0.49.0"
-  hyprwayland-scanner
-)
 
-# forcing to reinstall. Had experience it says hyprland is already installed
+hyprland=(
-f_hypr=(
+  libxcb-errors-dev
-  hyprland
+  libre2-dev
+  libglaze-dev
+  libudis86-dev
+  libinotify-ocaml-dev
 )
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+# Determine the directory where the script is located
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
 # Change the working directory to the parent directory of the script
 PARENT_DIR="$SCRIPT_DIR/.."
-cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+cd "$PARENT_DIR" || exit 1
 
-# Source the global functions script
+source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"
-if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
-  echo "Failed to source Global_functions.sh"
-  exit 1
-fi
 
 # Set the name of the log file to include the current date and time
 LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprland.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprland2.log"
 
+# Installation of dependencies
+printf "\n%s - Installing hyprland additional dependencies.... \n" "${NOTE}"
 
-# Hyprland
+for PKG1 in "${hyprland[@]}"; do
-printf "${NOTE} Installing ${SKY_BLUE}Hyprland packages${RESET} .......\n"
+  install_package "$PKG1" 2>&1 | tee -a "$LOG"
- for HYPR in "${hypr[@]}"; do
+  if [ $? -ne 0 ]; then
-   install_package "$HYPR" "$LOG"
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
 done
 
-# force
+printf "\n%.0s" {1..1}
-printf "${NOTE} Reinstalling ${SKY_BLUE}Hyprland packages${RESET}  .......\n"
- for HYPR1 in "${f_hypr[@]}"; do
-   re_install_package "$HYPR1" "$LOG"
-done
 
-printf "\n%.0s" {1..2} 
+# Installation of dependencies (glaze)
+printf "\n%s - Installing Hyprland additional dependencies (glaze).... \n" "${NOTE}"
+
+# Check if /usr/include/glaze exists
+if [ ! -d /usr/include/glaze ]; then
+    echo "${INFO} ${YELLOW}Glaze${RESET} is not installed. Installing ${YELLOW}glaze from assets${RESET} ..."
+    sudo dpkg -i assets/libglaze-dev_4.4.3-1_all.deb 2>&1 | tee -a "$LOG"
+    sudo apt-get install -f -y 2>&1 | tee -a "$LOG"
+    echo "${INFO} ${YELLOW}libglaze-dev from assets${RESET} installed."
+fi
+
+
+printf "\n%.0s" {1..1}
+
+# Clone, build, and install Hyprland using Cmake
+printf "${NOTE} Cloning and Installing ${YELLOW}Hyprland $tag${RESET} ...\n"
+
+# Check if Hyprland folder exists and remove it
+if [ -d "Hyprland" ]; then
+  printf "${NOTE} Removing existing Hyprland folder...\n"
+  rm -rf "Hyprland" 2>&1 | tee -a "$LOG"
+fi
+
+if git clone --recursive -b $tag "https://github.com/hyprwm/Hyprland"; then
+  cd "Hyprland" || exit 1
+  make all
+  if sudo make install 2>&1 | tee -a "$MLOG"; then
+    printf "${OK} ${MAGENTA}Hyprland tag${RESET}  installed successfully.\n" 2>&1 | tee -a "$MLOG"
+  else
+    echo -e "${ERROR} Installation failed for ${YELLOW}Hyprland $tag${RESET}" 2>&1 | tee -a "$MLOG"
+  fi
+  mv $MLOG ../Install-Logs/ || true   
+  cd ..
+else
+  echo -e "${ERROR} Download failed for ${YELLOW}Hyprland $tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}

install-scripts/hyprlang.sh

@@ -1,10 +1,11 @@
 #!/bin/bash
 # 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
 # hyplang #
 
 
 #specific branch or release
-lang_tag="v0.5.2"
+tag="v0.6.3"
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
@@ -32,21 +33,21 @@ if [ -d "hyprlang" ]; then
 fi
 
 # Clone and build 
-printf "${INFO} Installing ${YELLOW}hyprlang $lang_tag${RESET} ...\n"
+printf "${INFO} Installing ${YELLOW}hyprlang $tag${RESET} ...\n"
-if git clone --recursive -b $lang_tag https://github.com/hyprwm/hyprlang.git; then
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprlang.git; then
     cd hyprlang || exit 1
 	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
-    cmake --build ./build --config Release --target hyprlang -j`nproc 2>/dev/null || getconf _NPROCESSORS_CONF`
+	cmake --build ./build --config Release --target hyprlang -j`nproc 2>/dev/null || getconf _NPROCESSORS_CONF`
     if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
-        printf "${OK} ${MAGENTA}hyprlang $lang_tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+        printf "${OK} ${MAGENTA}hyprlang tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
     else
-        echo -e "${ERROR} Installation failed for ${YELLOW}hyprlang $lang_tag${RESET}" 2>&1 | tee -a "$MLOG"
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprlang $tag${RESET}" 2>&1 | tee -a "$MLOG"
     fi
     #moving the addional logs to Install-Logs directory
     mv $MLOG ../Install-Logs/ || true 
     cd ..
 else
-    echo -e "${ERROR} Download failed for ${YELLOW}hyprlang $lang_tag${RESET}" 2>&1 | tee -a "$LOG"
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprlang $tag${RESET}" 2>&1 | tee -a "$LOG"
 fi
 
 printf "\n%.0s" {1..2}

install-scripts/hyprlock.sh

@@ -7,12 +7,16 @@ lock=(
 	libgbm-dev
 	libdrm-dev
     libmagic-dev
-    libhyprlang-dev
+    libaudit-dev
-    libhyprutils-dev
+    libsdbus-c++-dev
+)
+
+build_dep=(
+    pam
 )
 
 #specific branch or release
-lock_tag="v0.4.0"
+tag="v0.9.0"
 
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
@@ -38,27 +42,31 @@ for PKG1 in "${lock[@]}"; do
   re_install_package "$PKG1" "$LOG"
 done
 
+for PKG1 in "${build_dep[@]}"; do
+  build_dep "$PKG1" "$LOG"
+done
+
 # Check if hyprlock directory exists and remove it
 if [ -d "hyprlock" ]; then
     rm -rf "hyprlock"
 fi
 
 # Clone and build hyprlock
-printf "${INFO} Installing ${YELLOW}hyprlock $lock_tag${RESET} ...\n"
+printf "${INFO} Installing ${YELLOW}hyprlock $tag${RESET} ...\n"
-if git clone --recursive -b $lock_tag https://github.com/hyprwm/hyprlock.git; then
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprlock.git; then
     cd hyprlock || exit 1
 	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -S . -B ./build
 	cmake --build ./build --config Release --target hyprlock -j`nproc 2>/dev/null || getconf _NPROCESSORS_CONF`
     if sudo cmake --install build 2>&1 | tee -a "$MLOG" ; then
-        printf "${OK} ${YELLOW}hyprlock $lock_tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
+        printf "${OK} ${YELLOW}hyprlock $tag${RESET} installed successfully.\n" 2>&1 | tee -a "$MLOG"
     else
-        echo -e "${ERROR} Installation failed for ${YELLOW}hyprlock $lock_tag${RESET}" 2>&1 | tee -a "$MLOG"
+        echo -e "${ERROR} Installation failed for ${YELLOW}hyprlock $tag${RESET}" 2>&1 | tee -a "$MLOG"
     fi
     #moving the addional logs to Install-Logs directory
     mv $MLOG ../Install-Logs/ || true 
     cd ..
 else
-    echo -e "${ERROR} Download failed for ${YELLOW}hyprlock $lock_tag${RESET}" 2>&1 | tee -a "$LOG"
+    echo -e "${ERROR} Download failed for ${YELLOW}hyprlock $tag${RESET}" 2>&1 | tee -a "$LOG"
 fi
 
 printf "\n%.0s" {1..2}

install-scripts/hyprpolkitagent.sh

@@ -0,0 +1,72 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hyprpolkitagent #
+
+polkitagent=(
+	libpolkit-agent-1-dev
+	libpolkit-qt6-1-dev
+  qml6-module-qtquick-layouts
+  qt6-tools-dev
+  qt6-tools-dev-tools
+  qt6-charts-dev
+)
+
+#specific branch or release
+tag="v0.1.2"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprpolkitagent.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprpolkitagent.log"
+
+# Installation of dependencies
+printf "\n%s - Installing hyprpolkitagent dependencies.... \n" "${NOTE}"
+
+for PKG1 in "${polkitagent[@]}"; do
+  re_install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+
+# Check if hyprpolkitagent folder exists and remove it
+if [ -d "hyprpolkitagent" ]; then
+    printf "${NOTE} Removing existing hyprpolkitagent folder...\n"
+    rm -rf "hyprpolkitagent"
+fi
+
+# Clone and build 
+printf "${NOTE} Installing hyprpolkitagent...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprpolkitagent.git; then
+    cd hyprpolkitagent || exit 1
+	cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+	cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf NPROCESSORS_CONF`
+    if sudo cmake --install ./build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} hyprpolkitagent installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for hyprpolkitagent." 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for hyprpolkitagent." 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}
+
+

install-scripts/hyprutils.sh

@@ -0,0 +1,52 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hyprutils #
+
+#specific branch or release
+tag="v0.8.1"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprutils.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprutils2.log"
+
+# Clone, build, and install using Cmake
+printf "${NOTE} Cloning hyprutils...\n"
+
+# Check if hyprutils folder exists and remove it
+if [ -d "hyprutils" ]; then
+  printf "${NOTE} Removing existing hyprutils folder...\n"
+  rm -rf "hyprutils" 2>&1 | tee -a "$LOG"
+fi
+
+if git clone -b $tag "https://github.com/hyprwm/hyprutils.git"; then
+  cd "hyprutils" || exit 1
+  cmake --no-warn-unused-cli -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -S . -B ./build
+  cmake --build ./build --config Release --target all -j`nproc 2>/dev/null || getconf _NPROCESSORS_CONF`
+  if sudo cmake --install build 2>&1 | tee -a "$MLOG"; then
+    printf "${OK} hyprutils installed successfully.\n" 2>&1 | tee -a "$MLOG"
+  else
+    echo -e "${ERROR} Installation failed for hyprutils." 2>&1 | tee -a "$MLOG"
+  fi
+  mv $MLOG ../Install-Logs/ || true   
+  cd ..
+else
+  echo -e "${ERROR} Download failed for hyprutils" 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}
+
+

install-scripts/hyprwayland-scanner.sh

@@ -0,0 +1,69 @@
+#!/bin/bash
+# 💫 https://github.com/JaKooLit 💫 #
+# Hypr Ecosystem #
+# hyprwayland-scanner #
+
+scan_depend=(
+    libpugixml-dev
+)
+
+#specific branch or release
+tag="v0.4.5"
+
+## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+# Change the working directory to the parent directory of the script
+PARENT_DIR="$SCRIPT_DIR/.."
+cd "$PARENT_DIR" || { echo "${ERROR} Failed to change directory to $PARENT_DIR"; exit 1; }
+
+# Source the global functions script
+if ! source "$(dirname "$(readlink -f "$0")")/Global_functions.sh"; then
+  echo "Failed to source Global_functions.sh"
+  exit 1
+fi
+
+# Set the name of the log file to include the current date and time
+LOG="Install-Logs/install-$(date +%d-%H%M%S)_hyprwayland-scanner.log"
+MLOG="install-$(date +%d-%H%M%S)_hyprwayland-scanner2.log"
+
+##
+# Installation of dependencies
+printf "\n%s - Installing hyprwayland-scanner dependencies.... \n" "${NOTE}"
+
+for PKG1 in "${scan_depend[@]}"; do
+  install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
+done
+
+printf "${NOTE} Installing hyprwayland-scanner...\n"  
+
+# Check if hyprwayland-scanner folder exists and remove it
+if [ -d "hyprwayland-scanner" ]; then
+    printf "${NOTE} Removing existing hyprwayland-scanner folder...\n"
+    rm -rf "hyprwayland-scanner"
+fi
+
+# Clone and build hyprlang
+printf "${NOTE} Installing hyprwayland-scanner...\n"
+if git clone --recursive -b $tag https://github.com/hyprwm/hyprwayland-scanner.git; then
+    cd hyprwayland-scanner || exit 1
+	cmake -DCMAKE_INSTALL_PREFIX=/usr -B build
+	cmake --build build -j `nproc`
+    if sudo cmake --install build 2>&1 | tee -a "$MLOG" ; then
+        printf "${OK} hyprwayland-scanner installed successfully.\n" 2>&1 | tee -a "$MLOG"
+    else
+        echo -e "${ERROR} Installation failed for hyprwayland-scanner." 2>&1 | tee -a "$MLOG"
+    fi
+    #moving the addional logs to Install-Logs directory
+    mv $MLOG ../Install-Logs/ || true 
+    cd ..
+else
+    echo -e "${ERROR} Download failed for hyprwayland-scanner. Please check log." 2>&1 | tee -a "$LOG"
+fi
+
+printf "\n%.0s" {1..2}
+

install-scripts/rofi-wayland.sh

@@ -35,7 +35,11 @@ rofi=(
   wget
 )
 
-rofi_tag="1.7.8+wayland1"
+# variables 
+rofi_tag="1.7.9+wayland1"
+release_url="https://github.com/lbonn/rofi/releases/download/1.7.9%2Bwayland1/rofi-1.7.9+wayland1.tar.gz"
+
+
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
@@ -62,7 +66,7 @@ printf "\n%s - Re-installing ${SKY_BLUE}rofi-wayland dependencies${RESET}.... \n
 
 printf "\n%.0s" {1..2}
 # Clone and build rofi - wayland
-printf "${NOTE} Installing ${SKY_BLUE}rofi-wayland${RESET}...\n"
+printf "${NOTE} Building and Installing ${SKY_BLUE}rofi-wayland${RESET} $rofi_tag ...\n"
 
 # Check if rofi directory exists
 if [ -d "rofi-$rofi_tag" ]; then
@@ -71,7 +75,7 @@ fi
 
 # cloning rofi-wayland
 printf "${NOTE} Downloading ${YELLOW}rofi-wayland $rofi_tag${RESET} from releases...\n"
-wget https://github.com/lbonn/rofi/releases/download/1.7.8%2Bwayland1/rofi-1.7.8+wayland1.tar.gz
+wget $release_url
 
 if [ -f "rofi-$rofi_tag.tar.gz" ]; then
   printf "${OK} ${YELLOW}rofi-wayland $rofi_tag${RESET} downloaded successfully.\n" 2>&1 | tee -a "$LOG"

install-scripts/sddm.sh

@@ -8,10 +8,13 @@ sddm1=(
 )
 
 sddm2=(
-  qt6-5compat-dev
+  libqt6svg6
-  qml6-module-qt5compat-graphicaleffects
   qt6-declarative-dev
   qt6-svg-dev
+  qt6-virtualkeyboard-plugin
+  libqt6multimedia6
+  qml6-module-qtquick-controls
+  qml6-module-qtquick-effects
 )
 
 # login managers to attempt to disable
@@ -77,6 +80,5 @@ sudo systemctl enable sddm.service 2>&1 | tee -a "$LOG"
 
 wayland_sessions_dir=/usr/share/wayland-sessions
 [ ! -d "$wayland_sessions_dir" ] && { printf "$CAT - $wayland_sessions_dir not found, creating...\n"; sudo mkdir -p "$wayland_sessions_dir" 2>&1 | tee -a "$LOG"; }
-sudo cp assets/hyprland.desktop "$wayland_sessions_dir/" 2>&1 | tee -a "$LOG"
 
 printf "\n%.0s" {1..2}

install-scripts/sddm_theme.sh

@@ -52,7 +52,6 @@ if git clone --depth=1 "$source_theme" "$theme_name"; then
   # Move cloned theme to the themes directory
   sudo mv "$theme_name" "/usr/share/sddm/themes/$theme_name" 2>&1 | tee -a "$LOG"
 
-
   # setting up SDDM theme
   sddm_conf="/etc/sddm.conf"
   BACKUP_SUFFIX=".bak"
@@ -86,10 +85,25 @@ if git clone --depth=1 "$source_theme" "$theme_name"; then
     echo "Added [Theme] section with Current=$theme_name in $sddm_conf" | tee -a "$LOG"
   fi
 
+  # Add [General] section with InputMethod=qtvirtualkeyboard if it doesn't exist
+  if ! grep -q '^\[General\]' "$sddm_conf"; then
+    echo -e "\n[General]\nInputMethod=qtvirtualkeyboard" | sudo tee -a "$sddm_conf" > /dev/null
+    echo "Added [General] section with InputMethod=qtvirtualkeyboard in $sddm_conf" | tee -a "$LOG"
+  else
+    # Update InputMethod line if section exists
+    if grep -q '^\s*InputMethod=' "$sddm_conf"; then
+      sudo sed -i '/^\[General\]/,/^\[/{s/^\s*InputMethod=.*/InputMethod=qtvirtualkeyboard/}' "$sddm_conf" 2>&1 | tee -a "$LOG"
+      echo "Updated InputMethod to qtvirtualkeyboard in $sddm_conf" | tee -a "$LOG"
+    else
+      sudo sed -i '/^\[General\]/a InputMethod=qtvirtualkeyboard' "$sddm_conf" 2>&1 | tee -a "$LOG"
+      echo "Appended InputMethod=qtvirtualkeyboard under [General] in $sddm_conf" | tee -a "$LOG"
+    fi
+  fi
+
   # Replace current background from assets
   sudo cp -r assets/sddm.png "/usr/share/sddm/themes/$theme_name/Backgrounds/default" 2>&1 | tee -a "$LOG"
   sudo sed -i 's|^wallpaper=".*"|wallpaper="Backgrounds/default"|' "/usr/share/sddm/themes/$theme_name/theme.conf" 2>&1 | tee -a "$LOG"
-
+  
   printf "\n%.0s" {1..1}
   printf "${NOTE} copying ${YELLOW}JetBrains Mono Nerd Font${RESET} to ${YELLOW}/usr/local/share/fonts${RESET} .......\n"
   printf "${NOTE} necessary for the new SDDM theme to work properly........\n"
@@ -107,8 +121,8 @@ if git clone --depth=1 "$source_theme" "$theme_name"; then
   fc-cache -v -f 2>&1 | tee -a "$LOG"
 
   printf "\n%.0s" {1..1}
-  
+
-  echo "${OK} - ${MAGENTA}Additional SDDM Theme${RESET} successfully installed." | tee -a "$LOG"
+  echo "${OK} - ${MAGENTA}Additional ${YELLOW}$theme_name SDDM Theme${RESET} successfully installed." | tee -a "$LOG"
 
 else
 

install-scripts/xdph.sh

@@ -3,10 +3,18 @@
 # XDG-Desktop-Portals for hyprland #
 
 xdg=(
-    xdg-desktop-portal-gtk
+  libdrm-dev
-    xdg-desktop-portal-hyprland
+  libpipewire-0.3-dev
+  libspa-0.2-dev
+  libsdbus-c++-dev
+  libwayland-client0
+  wayland-protocols
+  xdg-desktop-portal-gtk
 )
 
+#specific branch or release
+tag="v1.3.9"
+
 ## WARNING: DO NOT EDIT BEYOND THIS LINE IF YOU DON'T KNOW WHAT YOU ARE DOING! ##
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
@@ -26,9 +34,38 @@ LOG="Install-Logs/install-$(date +%d-%H%M%S)_xdph.log"
 [[ -f "/usr/lib/xdg-desktop-portal-hyprland" ]] && sudo rm "/usr/lib/xdg-desktop-portal-hyprland"
 
 # XDG-DESKTOP-PORTAL-HYPRLAND
-printf "${NOTE} Installing ${SKY_BLUE}xdg-desktop-portal-hyprland${RESET}\n\n" 
+printf "${NOTE} Installing ${SKY_BLUE}xdg-desktop-portal-hyprland dependencies${RESET}\n\n" 
-for xdgs in "${xdg[@]}"; do
+
-  install_package "$xdgs" "$LOG"
+for PKG1 in "${xdg[@]}"; do
+  re_install_package "$PKG1" 2>&1 | tee -a "$LOG"
+  if [ $? -ne 0 ]; then
+    echo -e "\e[1A\e[K${ERROR} - $PKG1 Package installation failed, Please check the installation logs"
+    exit 1
+  fi
 done
-    
+
+# Clone, build, and install XDPH
+printf "${NOTE} Cloning and Installing ${YELLOW}XDG Desktop Portal Hyprland $tag${RESET} ...\n"
+
+# Check if xdg-desktop-portal-hyprland folder exists and remove it
+if [ -d "xdg-desktop-portal-hyprland" ]; then
+  printf "${NOTE} Removing existing xdg-desktop-portal-hyprland folder...\n"
+  rm -rf "xdg-desktop-portal-hyprland" 2>&1 | tee -a "$LOG"
+fi
+
+if git clone --recursive -b $tag "https://github.com/hyprwm/xdg-desktop-portal-hyprland.git"; then
+  cd "xdg-desktop-portal-hyprland" || exit 1
+  cmake -DCMAKE_INSTALL_LIBEXECDIR=/usr/lib -DCMAKE_INSTALL_PREFIX=/usr -B build
+  cmake --build build
+  if sudo cmake --install build 2>&1 | tee -a "$MLOG"; then
+    printf "${OK} ${MAGENTA}xdph $tag${RESET}  installed successfully.\n" 2>&1 | tee -a "$MLOG"
+  else
+    echo -e "${ERROR} Installation failed for ${YELLOW}xdph $tag${RESET}" 2>&1 | tee -a "$MLOG"
+  fi
+  mv $MLOG ../Install-Logs/ || true   
+  cd ..
+else
+  echo -e "${ERROR} Download failed for ${YELLOW}xdph $tag${RESET}" 2>&1 | tee -a "$LOG"
+fi
+
 printf "\n%.0s" {1..2}

install.sh

@@ -19,11 +19,33 @@ BLUE="$(tput setaf 4)"
 SKY_BLUE="$(tput setaf 6)"
 RESET="$(tput sgr0)"
 
-# Display warning message
+# Function to print colorful text
-echo -e "${WARNING}NOTE:${RESET} Hyprland on Repo is extremely outdated and will not be supported anymore."
+print_color() {
-echo -e "Use this at your own risk." 
+    printf "%b%s%b\n" "$1" "$2" "$RESET"
-echo -e "${WARNING}Any issues will not be dealt with${RESET}"
+}
-echo
+
+# Warning: End of Life Support
+printf "\n%.0s" {1..2}
+print_color $YELLOW "
+        █▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█
+              KooL's Debian - Hyprland July 2025 Update
+              
+            Most Hyprland packages are built from Source
+
+                                NOTICE
+        █▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█
+
+    All Hyprland and associated packages set to install using this script are downloaded and built from source (github)
+    
+    However, do note that it is downloaded from each individual releases. You can set versions by editing the scripts
+    located install-scripts directory.
+
+    These packages are NOT updated automatically. You need to manually update it yourself
+    
+    BE WARNED!!!!!  Installation may take longer!!
+"
+printf "\n%.0s" {1..2}
+
 
 # Prompt user to continue or exit
 read -rp "Do you want to continue with the installation? [y/N]: " confirm
@@ -78,7 +100,7 @@ fi
 printf "\n%.0s" {1..2}  
 echo -e "\e[35m
 	╦╔═┌─┐┌─┐╦    ╦ ╦┬ ┬┌─┐┬─┐┬  ┌─┐┌┐┌┌┬┐
-	╠╩╗│ ││ │║    ╠═╣└┬┘├─┘├┬┘│  ├─┤│││ ││ 2025
+	╠╩╗│ ││ │║    ╠═╣└┬┘├─┘├┬┘│  ├─┤│││ ││ July 2025
 	╩ ╩└─┘└─┘╩═╝  ╩ ╩ ┴ ┴  ┴└─┴─┘┴ ┴┘└┘─┴┘ Debian Trixie / SiD
 \e[0m"
 printf "\n%.0s" {1..1} 
@@ -329,8 +351,28 @@ echo "${INFO} Installing ${SKY_BLUE}KooL Hyprland packages...${RESET}" | tee -a
 sleep 1
 execute_script "01-hypr-pkgs.sh"
 sleep 1
+execute_script "hyprutils.sh"
+sleep 1
+execute_script "hyprlang.sh"
+sleep 1
+execute_script "hyprcursor.sh"
+sleep 1
+execute_script "hyprwayland-scanner.sh"
+sleep 1
+execute_script "hyprgraphics.sh"
+sleep 1
+execute_script "aquamarine.sh"
+sleep 1
+execute_script "hyprland-qt-support.sh"
+sleep 1
+execute_script "hyprland-qtutils.sh"
+sleep 1
+execute_script "hyprland-protocols.sh"
+sleep 1
 execute_script "hyprland.sh"
 sleep 1
+execute_script "hyprpolkitagent.sh"
+sleep 1
 execute_script "wallust.sh"
 sleep 1
 execute_script "swww.sh"
@@ -339,8 +381,6 @@ execute_script "rofi-wayland.sh"
 sleep 1
 execute_script "hyprlock.sh"
 sleep 1
-execute_script "hyprlang.sh"
-sleep 1
 execute_script "hypridle.sh"
 
 #execute_script "imagemagick.sh" #this is for compiling from source. 07 Sep 2024
@@ -446,8 +486,8 @@ execute_script "03-Final-Check.sh"
 
 printf "\n%.0s" {1..1}
 
-# Check if either hyprland or hyprland-git is installed
+# Check if either hyprland or Hyprland files exist in /usr/local/bin/
-if dpkg -l | grep -qw hyprland; then
+if [ -e /usr/local/bin/hyprland ] || [ -f /usr/local/bin/Hyprland ]; then
     printf "\n ${OK} 👌 Hyprland is installed. However, some essential packages may not be installed. Please see above!"
     printf "\n${CAT} Ignore this message if it states ${YELLOW}All essential packages${RESET} are installed as per above\n"
     sleep 2